Paving and Asphalt Contractor Insurance in New Hampshire

Yes, general liability insurance is considered essential for any paving or asphalt contractor, covering third-party bodily injury, property damage, and completed-operations claims tied to lot paving, road work, and resurfacing.

A paver or roller can damage a curb or utility line, hot asphalt can splash onto a vehicle or a pedestrian’s property, and a surface that fails or heaves months after paving can turn into a costly lawsuit fast without coverage in place.

• Third-party bodily injury from a jobsite accident
• Property damage to a client’s property, vehicle, or adjacent structures
• Completed-operations claims after the job is finished
• Legal defense costs for covered claims

Typically NOT covered:

• Damage to your own tools, equipment, or vehicles
• Your own employees’ injuries (that’s workers’ comp)
• Faulty workmanship claims with no resulting property damage or injury in most states
• Intentional or contractual liability outside the policy terms

Who needs this: Every paving and asphalt contractor, solo crews through full paving operations, since jobsite and public-road work carries real third-party risk and general contractors and public agencies routinely require proof of GL before allowing work to start.

New Hampshire-specific note: New Hampshire paving contractors typically carry general liability because towns and commercial clients expect proof of coverage even without a state license requirement.

Learn more about this coverage →

Yes, nearly every state requires workers’ compensation insurance once a paving contractor has employees, and crews face real injury risk from hot asphalt burns, heavy equipment, and roadway traffic exposure.

Hot mix asphalt is applied at temperatures well above 250 degrees, and crews working around pavers, rollers, and live traffic lanes face a steady risk of severe burn, crush, and struck-by injuries, so workers’ comp is usually the only coverage that pays employee medical bills and lost wages.

• Medical bills for a work-related injury or illness
• Lost wages during recovery
• Disability benefits for permanent injuries
• Death benefits for dependents

Typically NOT covered:

• Injuries to non-employees (subcontractors typically need their own policy)
• Injuries from horsing around or intoxication in most states
• Occupational illness unrelated to the job
• Punitive damages

Who needs this: Any paving and asphalt contractor with employees, and in many states owner-operators too. Check the state’s specific exemption rules.

New Hampshire-specific note: New Hampshire requires workers compensation coverage from a private carrier for paving businesses with employees, since there is no state fund.

Learn more about this coverage →

Yes, hot asphalt burns are a recognized, well-documented severe injury category under workers’ compensation, and coverage responds to the medical costs and lost wages tied to a burn suffered while handling or laying hot mix.

Hot mix asphalt is applied at temperatures that can cause serious burns on contact, and splashes, spills, and equipment malfunctions during laydown are a genuine, recurring injury source in this trade, not a rare edge case.

• Medical treatment for a documented burn injury on the job
• Lost wages during recovery
• Disability benefits if the injury causes lasting impairment

Typically NOT covered:

• Injuries from horsing around or intoxication in most states
• Injuries to a non-employee subcontractor without their own coverage
• Punitive damages

Who needs this: Any paving contractor whose crew handles or applies hot mix asphalt.

New Hampshire-specific note: Hot asphalt burn injuries are a recognized workers compensation exposure for New Hampshire paving crews handling hot mix and sealcoating equipment.

Workers’ compensation is the coverage that responds to a documented silica-related occupational illness claim, and OSHA’s respirable crystalline silica standard (29 CFR 1926.1153) directly applies to milling and grinding asphalt and concrete surfaces.

Milling old pavement and grinding concrete both generate significant crystalline silica dust, and OSHA’s construction silica standard requires engineering controls, such as water suppression or vacuum dust collection, along with respiratory protection on this kind of work.

• Workers’ comp claims for a documented occupational illness tied to job exposure
• Legal defense costs tied to a covered claim

Typically NOT covered:

• OSHA citations and fines themselves are not insurable events
• Failure to follow required engineering controls or respiratory protection
• General liability does not typically respond to an employee’s own occupational illness, that’s workers’ comp

Who needs this: Any paving contractor whose crew mills or grinds asphalt or concrete surfaces.

New Hampshire-specific note: New Hampshire has no state OSHA plan, so federal OSHA’s silica standard under 29 CFR 1926.1153 governs milling and grinding dust exposure on New Hampshire job sites.

Yes, vehicles titled to your business, including dump trucks, asphalt distributor trucks, and equipment-hauling trailers, need commercial auto insurance since personal auto policies exclude business use.

Paving businesses run heavy trucks and equipment trailers on public roads daily, often alongside live traffic lanes, so a single at-fault accident can generate injury and cargo-related liability far above personal auto limits.

• Liability for injuries or property damage you cause while driving for work
• Physical damage to your own vehicles (with comp/collision)
• Hired and non-owned auto coverage for rented or borrowed vehicles
• Cargo/load-related liability in many policies

Typically NOT covered:

• Personal-use driving with no business nexus
• Mechanical breakdown or wear and tear
• Damage from operating outside permitted weight/route limits
• Cargo not covered under the specific policy’s cargo endorsement

Who needs this: Any paving contractor who owns, leases, or regularly uses trucks or trailers titled to the business to haul asphalt, equipment, and crews.

New Hampshire-specific note: Commercial auto coverage is important given the rural and small town road networks New Hampshire paving crews travel between jobs.

Learn more about this coverage →

Not automatically, general liability and auto policies don’t cover your own tools and equipment, so a separate tools & equipment (inland marine) policy is needed for pavers, rollers, and milling machines.

Pavers, rollers, and milling machines represent a major capital investment, and equipment staged at a jobsite overnight or moved between sites is exposed to theft and damage that standard property policies exclude.

• Theft of tools and equipment from a jobsite, trailer, or vehicle
• Accidental damage to owned equipment
• Equipment in transit between jobs
• Rented or leased equipment in many policies

Typically NOT covered:

• Normal wear and tear or mechanical breakdown
• Equipment not listed on the schedule
• Loss from unattended, unlocked trailers in some policies
• Gradual deterioration or rust

Who needs this: Any paving contractor who owns pavers, rollers, milling machines, or other heavy equipment worth protecting beyond replacing it out of pocket.

New Hampshire-specific note: Tools and equipment coverage matters because paving machinery is often left on site overnight during multi-day New Hampshire projects.

Learn more about this coverage →

Most state DOT and municipal paving contracts require prequalification with the awarding agency, a performance and payment bond sized to the contract value, and proof of general liability and workers’ compensation before you can bid.

Public agencies use prequalification, bonding, and insurance requirements to vet a paving contractor’s financial capacity and safety record before awarding road and infrastructure work, and falling short on any of these can disqualify a bid entirely.

• Minimum GL and WC limits specified in the bid documents
• Performance and payment bonds sized to the contract value
• Prequalification renewal and reporting requirements

Typically NOT covered:

• Coverage above your policy’s actual limits
• Bonding capacity beyond what a surety underwrites for your financial profile
• Requirements not stated in the bid documents

Who needs this: Any paving contractor bidding state DOT, county, or municipal road and infrastructure contracts where prequalification and bonding are a condition of bidding.

New Hampshire-specific note: New Hampshire Department of Transportation paving contracts require contractor prequalification tied to project size and history.

Most commercial and GC-subcontracted paving contracts require proof of general liability (often $1M/$2M limits) and workers’ compensation before you can start work, and many also require additional insured status naming the GC or property owner.

General contractors and commercial property owners use insurance requirements to transfer risk, and failing to meet a contract’s stated limits can get a paving sub pulled from a job or held liable directly.

• Minimum GL limits specified in the contract (commonly $1M per occurrence / $2M aggregate)
• Workers’ comp per state statutory limits
• Additional insured status naming the GC or property owner
• Waiver of subrogation when requested

Typically NOT covered:

• Coverage above your policy’s actual limits
• Requirements not stated in the written contract
• Retroactive coverage for work performed before the policy was active
• Waiver of subrogation unless specifically endorsed

Who needs this: Any paving contractor bidding commercial, multi-family, or GC-subcontracted work where the awarding party sets minimum insurance requirements.

New Hampshire-specific note: Written contracts should specify asphalt thickness and warranty terms given New Hampshire’s severe frost heave conditions.

Most paving contractors carry $1M/$2M general liability limits and statutory workers’ comp, adjusting upward for public infrastructure or larger commercial paving work where the bonding and liability exposure is higher.

Coverage needs scale with project size and the requirements written into contracts and bid documents, so a residential driveway paver and a state DOT road contractor often carry very different limits.

• $1M per occurrence / $2M aggregate GL as a common baseline
• Higher limits for public infrastructure or larger commercial projects
• State-mandated WC limits based on payroll and classification
• An umbrella policy for larger public works or commercial paving projects

Typically NOT covered:

• One-size-fits-all coverage, limits should match actual contract requirements
• Coverage gaps from underinsuring against a specific bid or contract clause
• Excess exposure without an umbrella policy

Who needs this: Any paving contractor should review their limits against the specific contracts and public bids they’re pursuing rather than assuming a flat minimum.

New Hampshire-specific note: Limits should reflect the scale of municipal, DOT, or residential driveway paving work a New Hampshire contractor takes on.

Your insurance agent or broker issues a certificate of insurance (COI) that summarizes your active coverage, limits, and effective dates for a general contractor, property owner, or public agency to keep on file.

A COI is the standard way contractors prove coverage without handing over the full policy, and most GCs, property managers, and public agencies won’t allow a paving crew on-site or on a bid list without one matching their required limits.

• Policy type, limits, and effective/expiration dates
• Additional insured endorsements when requested
• Certificate holder information for the requesting party
• Quick verification for bidding purposes

Typically NOT covered:

• A COI itself provides no coverage, it’s only proof of an existing policy
• Coverage changes made after the COI was issued unless reissued
• Guarantee of renewal or continued coverage

Who needs this: Any paving contractor working with general contractors, property managers, or public agencies that require documented proof of insurance before work starts.

New Hampshire-specific note: Certificates of insurance are commonly requested by New Hampshire towns and general contractors before a paving subcontractor can start work.