Plumbing Contractor Insurance in New Hampshire

Yes, general liability insurance is the baseline policy every plumbing contractor needs before starting work in a client’s property.

Plumbing failures cause water damage fast, and a single burst pipe or bad solder joint can flood a floor below and turn into a claim worth far more than the original job.

What’s typically covered:

• Third-party property damage from water, flooding, or leaks tied to your work
• Bodily injury to a client or bystander on the job site
• Completed operations claims that surface after the job is finished
• Legal defense costs if a claim leads to a lawsuit

What’s typically NOT covered:

• Your own crew’s injuries (that is workers’ compensation)
• Damage to your own tools, cameras, or vehicles
• Faulty workmanship with no resulting third-party damage
• Work performed without a required license or permit

Who needs this: Every plumbing contractor, from a solo service plumber to a commercial mechanical contractor, needs this coverage before the first service call.

New Hampshire note: General liability insurance covers water damage, property loss, and injury claims that are common when working on frozen or burst pipes in older New Hampshire homes. It also protects against claims arising after a repair when hidden system issues cause a later failure.

General Liability Insurance for Contractors

Most plumbing contractors with employees are legally required to carry workers’ compensation, and the confined-space and equipment exposure in the trade make it essential regardless.

Plumbing work involves confined spaces, trenching, and pressurized systems, a combination that produces serious injuries even though the trade is not always thought of as high-risk.

What’s typically covered:

• Medical bills for a job-related injury such as a pipe-burst or trench injury
• Lost wages while an injured plumber recovers
• Disability and death benefits
• Legal costs if an injury claim is disputed

What’s typically NOT covered:

• Independent contractors who are not true employees
• Injuries outside the scope of work
• Injuries caused by intoxication or willful safety violations
• Property damage of any kind

Who needs this: Any plumbing contractor with one or more employees, and often solo plumbers as well depending on state rules.

New Hampshire note: In New Hampshire: Workers’ compensation is required under RSA 281-A:5 for nearly all NH employers, and plumbing work carries injury risk from confined spaces, heavy fixtures, and emergency winter repairs performed under time pressure.

Workers Compensation Insurance for Contractors

General liability with completed operations coverage responds to water damage and flooding traced back to plumbing work, including damage discovered after the job is done.

Water damage claims are the most common and often the most expensive claim category plumbers face, because water travels through floors and walls long before anyone notices the source.

What’s typically covered:

• Property damage from a leak, burst pipe, or bad connection tied to your work
• Water damage discovered weeks after the job (completed operations)
• Mold remediation costs directly tied to a covered water-damage claim
• Legal defense if the property owner or their insurer disputes fault

What’s typically NOT covered:

• Pre-existing plumbing failures unrelated to your work
• Flooding from external sources like storms or municipal main breaks
• Damage from a repair you flagged as needed but the client declined to authorize

Who needs this: Every plumbing contractor doing repair, repipe, or fixture installation work, where a small workmanship error can flood an entire floor.

New Hampshire note: In New Hampshire: Extreme cold and hard winter freezes across northern and inland NH. Drives frozen and burst-pipe emergency calls, raising water-damage liability exposure.

Commercial Umbrella Insurance for Contractors

Workers’ comp covers your crew’s injuries from pipe bursts and confined-space work, while general liability covers injury to anyone else on site.

Confined-space plumbing work, crawlspaces, trenches, and utility vaults, carries fall, cave-in, and pressurized-line injury risk that standard office-based coverage never anticipates.

What’s typically covered:

• Workers’ comp: medical costs and lost wages for a crew member’s pipe-burst or confined-space injury
• General liability: injury to a client or bystander from a burst line or unstable excavation
• Legal defense if a confined-space injury leads to an OSHA-driven lawsuit

What’s typically NOT covered:

• Injuries from entering a confined space without required atmospheric testing or permits
• Damage to safety equipment like gas monitors or shoring
• Injuries that occur off the job site

Who needs this: Every plumber who works in trenches, crawlspaces, or utility vaults, and every contractor who wants a serious injury claim covered rather than paid out of pocket.

New Hampshire note: In New Hampshire: Older New England homes with aging cast-iron and galvanized plumbing. Increases completed-operations claims when replacement or repair work reveals hidden system failures.

Tools & Equipment Insurance for Contractors

Yes, service vehicles used to haul tools, pipe, and equipment for business need a commercial auto policy rather than a personal one.

Personal auto policies exclude business use, and a plumbing van loaded with pipe stock, a camera rig, and a drain machine is squarely business use that a personal policy will not pay for.

What’s typically covered:

• Collision and liability for company-owned service vehicles
• Hired and non-owned auto coverage for rented or borrowed vehicles
• Cargo coverage for pipe, fixtures, and equipment in transit
• Medical payments for anyone injured in a covered vehicle

What’s typically NOT covered:

• Personal errands unrelated to the business
• Mechanical breakdown or routine wear and tear
• Unsecured cargo left in violation of policy terms

Who needs this: Any plumbing contractor who drives a van, truck, or trailer between service calls, even a single owner-operator.

New Hampshire note: Commercial auto coverage supports plumbers responding to emergency freeze and burst-pipe calls across New Hampshire’s rural areas, where response distances and winter road conditions raise vehicle risk.

Commercial Auto Insurance for Contractors

Tools and equipment coverage protects drain machines, sewer cameras, and welding gear against theft and damage, which general liability does not.

Plumbing equipment like sewer cameras and hydro-jetters is expensive and frequently left in service vehicles, making it a common theft target.

What’s typically covered:

• Theft of tools and equipment from a vehicle or job site
• Fire or storm damage to owned equipment
• Equipment in transit between job sites
• Rented or leased equipment you are contractually responsible for

What’s typically NOT covered:

• Normal wear and tear on equipment
• Equipment left in an unlocked vehicle in violation of policy terms
• Consumable supplies like pipe, fittings, or solder

Who needs this: Any plumbing contractor carrying drain machines, cameras, or welding equipment beyond a basic hand-tool kit.

New Hampshire note: In New Hampshire: Tools and equipment coverage protects pipe-freezing kits, drain equipment, and fixtures from theft or damage, which matters during peak winter emergency-call season when equipment is in constant transit.

Tools & Equipment Insurance for Contractors

Gas line and sewer or septic work typically requires higher liability limits and, in many cases, specific carrier disclosure or endorsement.

Gas line work carries explosion and fire risk, and sewer or septic work carries pollution and contamination exposure, both categories that standard general liability policies limit or exclude unless properly disclosed.

What’s typically covered:

• Liability for gas leak or explosion claims when the work is properly disclosed
• Limited pollution liability for sewer or septic contamination when endorsed
• Higher-limit general liability sized to the exposure

What’s typically NOT covered:

• Work performed outside your licensed scope or certification level
• Pollution or contamination losses without a pollution liability endorsement
• Losses from equipment that was not properly disclosed at application

Who needs this: Plumbing contractors who install or repair gas lines, septic systems, or sewer connections, where standard limits and standard exclusions do not fit the exposure.

New Hampshire note: In New Hampshire: Ice dam-related water intrusion overlapping with plumbing and drainage repairs. Adds joint liability exposure on jobs where plumbing and roofing systems interact.

Commercial Umbrella Insurance for Contractors

Commercial plumbing contracts almost always require proof of general liability, workers’ comp, and often an additional-insured endorsement before work begins.

General contractors and building owners use insurance requirements to shift their own liability exposure back to the plumbing sub before granting site access.

What’s typically covered:

• Certificate of insurance requirements naming the GC or owner as additional insured
• Waiver of subrogation clauses standard GL policies can typically accommodate
• Minimum limit requirements, commonly $1M per occurrence / $2M aggregate on commercial work

What’s typically NOT covered:

• Payment or scope disputes with no insurable loss attached
• Liquidated damages for late completion
• Contract requirements above your carried limits without an umbrella policy

Who needs this: Any plumbing contractor bidding commercial, industrial, or multi-family work, where GCs routinely require a compliant COI before allowing work to start.

New Hampshire note: No New Hampshire-specific contract-clause deviation beyond standard additional-insured and limit requirements applies here.

Surety Bonds for Contractors

Most working plumbing contractors carry general liability limits of at least $1 million per occurrence and $2 million aggregate, with workers’ comp and commercial auto sized to payroll and fleet.

Commercial GCs and property owners typically set the real coverage floor, since even permissive state minimums rarely satisfy what larger contracts demand.

What’s typically covered:

• General liability: $1M per occurrence / $2M aggregate is the common commercial floor
• Workers’ compensation: statutory limits, rated by payroll and job classification
• Commercial auto: commonly $1M combined single limit
• Tools & equipment: scheduled value or blanket coverage sized to owned equipment

What’s typically NOT covered:

• Coverage above your carried limits without a commercial umbrella policy
• Claims that exceed policy aggregate limits within the policy period

Who needs this: Any plumber who wants to qualify for commercial, industrial, or larger residential contracts rather than being limited to small owner-direct jobs.

New Hampshire note: No New Hampshire-specific limit deviation beyond the commercial floor described above applies here.

Commercial Umbrella Insurance for Contractors

A certificate of insurance (COI) is a one-page document your insurer issues that proves your active coverage and limits to a client or general contractor.

GCs, property managers, and permitting offices routinely require a COI before allowing a plumbing crew to start work, and an expired or incorrect COI can stall or void a contract.

What’s typically covered:

• Proof of active general liability and workers’ comp coverage
• Listed coverage limits and policy effective dates
• Additional insured endorsements when a GC or property owner requires one

What’s typically NOT covered:

• A COI is not itself insurance and provides no coverage on its own
• A COI does not guarantee a claim will be paid if the underlying policy excludes it

Who needs this: Every plumbing contractor who works with general contractors, property managers, or commercial clients requiring proof of coverage before granting site access.

New Hampshire note: No New Hampshire-specific COI deviation beyond standard additional-insured documentation applies here.

Contractor Licensing Guide