Solar Contractor Insurance in Arkansas

Yes, general liability insurance is considered essential for any solar installer, covering third-party bodily injury, property damage, and completed-operations claims tied to the systems you install.

Solar installations combine roof work, electrical connections, and heavy panels on a client’s property, so a single roof leak, fall, or property-damage claim can exceed what most installers can pay out of pocket.

• Third-party bodily injury on or near the jobsite
• Property damage to a client’s home, business, or roof
• Completed-operations claims after the system is installed
• Legal defense costs for covered claims

Typically NOT covered:

• Damage to your own tools, equipment, or vehicles
• Your own employees’ injuries (that’s workers’ comp)
• Faulty workmanship claims with no resulting property damage or injury in most states
• Intentional or contractual liability outside the policy terms

Who needs this: Every solar installer, solo or running full crews, since roof and electrical work carries real third-party risk, and property owners and utilities routinely require proof of GL before authorizing an install.

Arkansas-specific note: Yes, Arkansas solar installers need general liability, especially because the state’s split licensing structure (separate building and electrical credentials) means liability for a leak or fire can span two different trades on one job.

Learn more about this coverage →

Yes, nearly every state requires workers’ compensation insurance once a solar installer has employees, and solar crews face real fall-risk exposure working on rooftops all day.

Solar installation involves ladders, roof access, and heavy panels handled at height, so on-the-job injuries are a real possibility, and workers’ comp is usually the only coverage that pays employee medical bills and lost wages.

• Medical bills for a work-related injury or illness
• Lost wages during recovery
• Disability benefits for permanent injuries
• Death benefits for dependents

Typically NOT covered:

• Injuries to non-employees (subcontractors typically need their own policy)
• Injuries from horsing around or intoxication in most states
• Occupational illness unrelated to the job
• Punitive damages

Who needs this: Any solar installer with employees, and in many states owner-operators too. Check the state’s specific exemption rules.

Arkansas-specific note: Arkansas requires workers’ comp once a contractor reaches 3 employees under Ark. Code Ann. § 11-9-101: a lower threshold than many neighboring states, and roof-based solar work carries real fall risk regardless of the state’s overall low-cost rate environment.

Learn more about this coverage →

Sometimes, general liability may cover resulting property damage from a roof penetration or flashing failure, but a pure workmanship defect with no resulting damage is typically excluded, and roof leaks are one of the most common solar-specific liability claims.

Mounting racking and hardware means putting new penetrations through an existing roof, and if flashing or sealant work is done wrong, water intrusion can surface months after the crew has moved on to the next job.

• Property damage from a mounting-related roof leak or flashing failure
• Water damage to the interior of a client’s home from a roof penetration
• Damage from a sudden, unexpected event during installation

Typically NOT covered:

• The cost to repair or replace your own defective mounting or sealant work
• Damage from a pre-existing roof condition you didn’t cause
• Gradual leaks attributable to workmanship rather than a covered occurrence

Who needs this: Any solar installer mounting racking or panels on an existing roof, which is the majority of residential and commercial solar work.

Arkansas-specific note: Yes, roof leaks from racking penetrations are a common solar claim, and completed-operations coverage under a GL policy is what responds when a leak or flashing failure surfaces after the job is done.

Sometimes, a DC arc-fault fire or inverter failure surfacing after the job is done falls under completed-operations/product liability, but the coverage depends on whether the failure traces back to your installation work or a defective product.

Solar systems carry live DC electrical current at height for the life of the system, and an arc fault or wiring fault that ignites months or years after installation is one of the more serious completed-operations exposures in the trade.

• Property damage or fire loss traced to an installation-related electrical fault
• Third-party injury from a post-installation system failure
• Legal defense costs for covered completed-operations claims

Typically NOT covered:

• Manufacturer defects in panels, inverters, or racking (that’s a product liability claim against the manufacturer)
• Damage from unauthorized modifications made after your install
• Normal equipment degradation over the system’s lifespan

Who needs this: Any solar installer performing electrical connections, since a DC arc-fault fire is a real, serious risk that standard contractor GL is built to respond to.

Arkansas-specific note: A DC arc-fault fire or inverter failure after installation falls under completed-operations/product liability coverage, an important gap to close given that Arkansas’s split licensing structure means the electrician and the mounting contractor may carry separate policies.

Yes, vehicles titled to your business, including trucks hauling panels, racking, and inverters, need commercial auto insurance since personal auto policies exclude business use.

Solar crews haul heavy, valuable equipment between jobsites regularly, so cargo exposure is a real consideration alongside standard liability, and a single at-fault accident can generate injury and cargo-related liability far above personal auto limits.

• Liability for injuries or property damage you cause while driving for work
• Physical damage to your own vehicles (with comp/collision)
• Cargo coverage for panels, racking, and inverters in transit
• Hired and non-owned auto coverage for rented or borrowed vehicles

Typically NOT covered:

• Personal-use driving with no business nexus
• Mechanical breakdown or wear and tear
• Damage from operating outside permitted weight/route limits
• Cargo not covered under the specific policy’s cargo endorsement

Who needs this: Any solar installer who owns, leases, or regularly uses vehicles titled to the business to haul equipment between jobs.

Arkansas-specific note: Yes, commercial auto with cargo coverage is important for hauling panels and racking between Arkansas jobsites, since a personal auto policy typically excludes business equipment hauling.

Learn more about this coverage →

Not automatically, general liability and auto policies don’t cover your own equipment, so a separate tools & equipment (inland marine) policy is needed for panels, racking, and inverters.

Solar panels and racking represent real capital tied up in inventory, and equipment staged at a jobsite or held in a yard before installation is exposed to theft and weather damage that standard property policies exclude.

• Theft of panels, racking, or tools from a jobsite, yard, or vehicle
• Accidental damage to staged equipment before installation
• Equipment in transit between jobs
• Rented or leased equipment in many policies

Typically NOT covered:

• Normal wear and tear or mechanical breakdown
• Equipment not listed on the schedule
• Loss from unattended, unlocked vehicles in some policies
• Gradual deterioration or weather damage over time

Who needs this: Any solar installer who owns panels, racking, inverters, or tools worth protecting beyond replacing them out of pocket.

Arkansas-specific note: Tools & equipment or inland marine coverage should cover panels, racking, and inverters staged at a site or in transit, protecting against theft or damage before installation is complete.

Learn more about this coverage →

In many states, yes, solar installation is regulated as electrical work and routes through an electrical contractor license rather than a dedicated ‘solar installer’ license.

Because a solar system ties into a building’s electrical panel and the utility grid, most states treat the interconnection work as licensed electrical work, even in states with no general contractor licensing at all.

• A prerequisite to legally performing solar electrical connections in most states
• Often required even in states with no general contractor license
• May require NABCEP certification or a supervising licensed electrician depending on the state

Typically NOT covered:

• A substitute for general liability or workers’ comp insurance
• A guarantee that non-electrical mounting/racking work is also covered
• Uniform across states, licensing paths vary significantly by state

Who needs this: Any solar installer performing or supervising the electrical interconnection, not just the mechanical mounting work.

Arkansas-specific note: Arkansas has no dedicated solar license, installers need a Building Construction-classified ACLB license for the structural work plus a separately licensed master or supervised journeyman electrician for the PV wiring.

Most commercial and utility-scale solar contracts require proof of general liability (often $1M/$2M limits), workers’ compensation, commercial auto, and increasingly an umbrella policy given the size of the systems involved.

Property owners, utilities, and EPC firms use insurance requirements to transfer risk, and failing to meet a contract’s stated limits can get an installer pulled from a job or held liable directly.

• Minimum GL limits specified in the contract (commonly $1M per occurrence / $2M aggregate)
• Workers’ comp per state statutory limits
• Commercial auto liability for hauling equipment to site
• Additional insured status naming the property owner or utility

Typically NOT covered:

• Coverage above your policy’s actual limits
• Requirements not stated in the written contract
• Retroactive coverage for work performed before the policy was active
• Waiver of subrogation unless specifically endorsed

Who needs this: Any solar installer bidding commercial, municipal, or utility-scale contracts where an owner or utility sets minimum insurance requirements.

Arkansas-specific note: Commercial and utility-scale solar bids in Arkansas usually require higher GL and umbrella limits plus proof of workers’ comp, and given the state’s changed 2024 net metering rules, contracts should also clarify which net metering schedule the customer will fall under.

Most solar installers carry $1M/$2M general liability limits, statutory workers’ comp, and $1M commercial auto liability, often adding an umbrella policy given how much a single system failure or fire claim can cost.

Coverage needs scale with system size and the requirements written into contracts, so a residential rooftop installer and a commercial/utility-scale crew often carry very different limits.

• $1M per occurrence / $2M aggregate GL as a common baseline
• An umbrella policy for larger commercial or utility-scale systems
• State-mandated WC limits based on payroll and classification
• Auto liability matched to fleet size and cargo value

Typically NOT covered:

• One-size-fits-all coverage, limits should match actual contract requirements
• Coverage gaps from underinsuring against a specific contract clause
• Excess exposure without an umbrella policy

Who needs this: Any solar installer should review their limits against the specific contracts they’re bidding rather than assuming a flat minimum.

Arkansas-specific note: Most Arkansas solar installers carry at least $1M/$2M general liability, and firms bidding commercial or utility-scale work often add a commercial umbrella policy given the size of potential large-array claims.

Your insurance agent or broker issues a certificate of insurance (COI) that summarizes your active coverage, limits, and effective dates for a property owner, utility, or general contractor to keep on file.

A COI is the standard way installers prove coverage without handing over the full policy, and most utilities and property owners won’t authorize an interconnection or allow work to start without one matching their required limits.

• Policy type, limits, and effective/expiration dates
• Additional insured endorsements when requested
• Certificate holder information for the requesting party
• Quick verification for bidding and permitting purposes

Typically NOT covered:

• A COI itself provides no coverage, it’s only proof of an existing policy
• Coverage changes made after the COI was issued unless reissued
• Guarantee of renewal or continued coverage

Who needs this: Any solar installer working with property owners, utilities, or general contractors that require documented proof of insurance before work starts.

Arkansas-specific note: Your agent can issue a same-day certificate of insurance naming the property owner, general contractor, or utility as certificate holder, showing your current GL, auto, and workers’ comp coverage.