Remodeling Contractor Insurance in Texas

Yes, general liability insurance is considered essential for any remodeling contractor, covering third-party bodily injury, property damage, and completed-operations claims tied to renovation work in an occupied home or business.

A dropped tool can crack a client’s flooring, a demo crew can damage a neighboring unit’s shared wall, and a poorly sealed roof cut can let water into a finished space months later, all real claims that turn into a lawsuit fast without coverage in place.

• Third-party bodily injury from a renovation-related accident
• Property damage to a client’s home, furnishings, or adjacent structures
• Completed-operations claims after the job is finished
• Legal defense costs for covered claims

Typically NOT covered:

• Damage to your own tools, equipment, or vehicles
• Your own employees’ injuries (that’s workers’ comp)
• Faulty workmanship claims with no resulting property damage or injury in most states
• Intentional or contractual liability outside the policy terms

Who needs this: Every remodeling contractor, solo kitchen-and-bath specialists through full design-build crews, since working inside an occupied structure carries real third-party risk, and general contractors and homeowners routinely require proof of GL before allowing work to start.

Texas-specific note: Texas remodeling contractors, especially non-subscribers to workers’ compensation, should carry robust general liability limits since GL and related coverage carry more of the injury-claim burden in Texas’s opt-in WC system.

Learn more about this coverage →

Yes, nearly every state requires workers’ compensation insurance once a remodeling contractor has employees, and crews face real injury risk from demolition, power tool use, and working in tight, partially-finished spaces.

Tear-out and demo work causes a steady stream of cut, strain, and fall injuries, and crews working in cramped attics, crawlspaces, or scaffolding on an occupied structure face real risk on top of that, so workers’ comp is usually the only coverage that pays employee medical bills and lost wages.

• Medical bills for a work-related injury or illness
• Lost wages during recovery
• Disability benefits for permanent injuries
• Death benefits for dependents

Typically NOT covered:

• Injuries to non-employees (subcontractors typically need their own policy)
• Injuries from horsing around or intoxication in most states
• Occupational illness unrelated to the job
• Punitive damages

Who needs this: Any remodeling contractor with employees, and in many states owner-operators too. Check the state’s specific exemption rules.

Texas-specific note: Texas allows most private employers, including remodeling contractors, to opt out of workers’ compensation as non-subscribers, but doing so removes standard legal defenses against employee injury lawsuits, so many remodelers still choose to carry it.

Learn more about this coverage →

Sometimes, standard general liability often excludes or sharply limits pollution and mold-related claims, so remodeling contractors who might disturb old asbestos, hidden mold, or rot during demolition typically need a pollution/mold endorsement or a separate policy.

Opening up an older home’s walls, floors, or ceilings routinely uncovers hidden mold, asbestos-containing materials, or structural rot that wasn’t part of the original scope, and disturbing it improperly can trigger a serious liability claim and remediation cost.

• Third-party bodily injury or property damage from a covered pollution incident, when the endorsement is in place
• Legal defense costs for a covered claim
• Some completed-operations claims tied to a covered incident

Typically NOT covered:

• Standard mold and pollution exclusions under a base GL policy with no endorsement
• The cost of remediation itself absent a specific pollution policy
• Pre-existing conditions the contractor didn’t cause or worsen

Who needs this: Any remodeling contractor working in structures built before the 1980s, where legacy asbestos, lead, and hidden moisture damage are common discoveries mid-job.

Texas-specific note: Texas remodelers renovating older homes in cities like Houston, Dallas, or San Antonio should plan for possible asbestos or lead paint discovery, since federal RRP lead rules apply nationwide to any pre-1978 housing regardless of Texas’s lack of a state contractor license.

Sometimes, general liability and professional liability can respond to a completed-operations claim tied to a structural modification done incorrectly, but removing or altering a load-bearing wall without proper engineering carries real, serious liability exposure.

Opening up floor plans by removing walls is one of the most common remodeling requests, and a wall removed without the right beam, post, or permit can lead to sagging floors, cracked drywall, or a real structural failure long after the crew has left.

• Completed-operations claims tied to a structural modification done incorrectly
• Legal defense costs for a covered claim
• Property damage claims from a related structural failure

Typically NOT covered:

• Code violations or failed inspections themselves are not insurable events
• Pure workmanship correction costs with no resulting covered damage
• Claims arising from an engineer’s or architect’s own design error, which falls to their own policy

Who needs this: Any remodeling contractor removing or altering load-bearing walls, floors, or roof structures, where a permit and engineering review meaningfully reduce this risk.

Texas-specific note: Texas has no statewide building code enforcement body for residential remodeling, so structural permit and inspection requirements for a remodel are set entirely by the local city or county building department.

Yes, vehicles titled to your business, including trucks hauling tools, debris, and materials, need commercial auto insurance since personal auto policies exclude business use.

Remodeling businesses haul tools, lumber, and demolition debris through residential neighborhoods and job sites all day, so a single at-fault accident can generate injury and cargo-related liability far above personal auto limits.

• Liability for injuries or property damage you cause while driving for work
• Physical damage to your own vehicles (with comp/collision)
• Hired and non-owned auto coverage for rented or borrowed vehicles
• Cargo/load-related liability in many policies

Typically NOT covered:

• Personal-use driving with no business nexus
• Mechanical breakdown or wear and tear
• Damage from operating outside permitted weight/route limits
• Cargo not covered under the specific policy’s cargo endorsement

Who needs this: Any remodeling contractor who owns, leases, or regularly uses vehicles or trailers titled to the business to haul materials, debris, and crews.

Texas-specific note: Texas remodeling contractors serving sprawling metro areas or multiple regions of the state should carry commercial auto limits sized for significant daily mileage between job sites.

Learn more about this coverage →

Not automatically, general liability and auto policies don’t cover your own tools and equipment, so a separate tools & equipment (inland marine) policy is needed for saws, nailers, and other portable equipment.

Table saws, framing nailers, and other portable power tools represent a real investment, and equipment left in a client’s home overnight or hauled between jobs is exposed to theft and damage that standard property policies exclude.

• Theft of tools and equipment from a jobsite, trailer, or vehicle
• Accidental damage to owned equipment
• Equipment in transit between jobs
• Rented or leased equipment in many policies

Typically NOT covered:

• Normal wear and tear or mechanical breakdown
• Equipment not listed on the schedule
• Loss from unattended, unlocked trailers in some policies
• Gradual deterioration or rust

Who needs this: Any remodeling contractor who owns saws, nailers, or other portable equipment worth protecting beyond replacing it out of pocket.

Texas-specific note: Texas remodeling contractors should insure tools and equipment with inland marine coverage that travels with the crew, since there is no statewide licensing framework standardizing job-site security expectations.

Learn more about this coverage →

Often yes, standard tools & equipment coverage is built for tools, not materials, so remodeling contractors staging cabinets, appliances, or fixtures in a client’s home or garage should confirm their policy covers theft and damage specifically.

Multi-week remodel jobs often mean expensive cabinets, appliances, and fixtures sit staged in a client’s home or driveway for days before installation, a real and distinguishing exposure since the homeowner’s own policy typically won’t cover a contractor’s undelivered materials.

• Theft of staged materials from a jobsite or client’s property, when specifically covered
• Damage to staged materials before installation, when endorsed
• Materials in transit to the jobsite in many policies

Typically NOT covered:

• Materials theft or damage under a policy with no materials endorsement
• Normal handling wear on protective packaging
• Materials already installed and not separately scheduled

Who needs this: Any remodeling contractor who stages cabinets, appliances, or fixtures on a jobsite or in a client’s home before installation.

Texas-specific note: Multi-week Texas remodel jobs storing cabinets, appliances, or fixtures on-site should carry installation or builder’s risk coverage, since standard GL generally will not cover theft or storm damage to staged materials.

Most commercial and GC-subcontracted remodeling contracts require proof of general liability (often $1M/$2M limits) and workers’ compensation before you can start work, and many also require additional insured status naming the GC or property owner.

General contractors and commercial property owners use insurance requirements to transfer risk, and failing to meet a contract’s stated limits can get a remodeling sub pulled from a job or held liable directly.

• Minimum GL limits specified in the contract (commonly $1M per occurrence / $2M aggregate)
• Workers’ comp per state statutory limits
• Additional insured status naming the GC or property owner
• Waiver of subrogation when requested

Typically NOT covered:

• Coverage above your policy’s actual limits
• Requirements not stated in the written contract
• Retroactive coverage for work performed before the policy was active
• Waiver of subrogation unless specifically endorsed

Who needs this: Any remodeling contractor bidding commercial, multi-family, or GC-subcontracted work where the awarding party sets minimum insurance requirements.

Texas-specific note: Texas remodeling subcontractors working under a general contractor on larger jobs should expect the GC to require a certificate of insurance and proof of workers’ compensation status, since the state’s opt-in WC system creates added scrutiny of subcontractor coverage.

Most remodeling contractors carry $1M/$2M general liability limits and statutory workers’ comp, adjusting upward for larger commercial or multi-unit projects where the completed-operations exposure is higher.

Coverage needs scale with project size and the requirements written into contracts, so a residential kitchen-and-bath remodeler and a commercial tenant-improvement company often carry very different limits.

• $1M per occurrence / $2M aggregate GL as a common baseline
• Higher limits for larger commercial or multi-unit projects
• State-mandated WC limits based on payroll and classification
• A pollution/mold endorsement for older-structure demolition work

Typically NOT covered:

• One-size-fits-all coverage, limits should match actual contract requirements
• Coverage gaps from underinsuring against a specific contract clause
• Excess exposure without an umbrella policy

Who needs this: Any remodeling contractor should review their limits against the specific contracts they’re bidding rather than assuming a flat minimum.

Texas-specific note: Texas remodeling contractors commonly carry $1 million per occurrence and $2 million aggregate GL limits, with many GCs on larger residential or commercial remodels requiring higher umbrella limits given the state’s opt-in WC exposure.

Your insurance agent or broker issues a certificate of insurance (COI) that summarizes your active coverage, limits, and effective dates for a general contractor, property owner, or homeowner to keep on file.

A COI is the standard way contractors prove coverage without handing over the full policy, and most GCs and property managers won’t allow a remodeling crew on-site without one matching their required limits.

• Policy type, limits, and effective/expiration dates
• Additional insured endorsements when requested
• Certificate holder information for the requesting party
• Quick verification for bidding purposes

Typically NOT covered:

• A COI itself provides no coverage, it’s only proof of an existing policy
• Coverage changes made after the COI was issued unless reissued
• Guarantee of renewal or continued coverage

Who needs this: Any remodeling contractor working with general contractors, property managers, or municipalities that require documented proof of insurance before work starts.

Texas-specific note: Texas general contractors and property owners typically require a certificate of insurance from remodeling subcontractors, and because Texas WC is optional, many COIs also specifically confirm whether the sub carries workers’ compensation or operates as a non-subscriber.