Siding Contractor Insurance in Michigan

Yes, general liability insurance is considered essential for any siding contractor, covering third-party bodily injury, property damage, and completed-operations claims tied to exterior siding installation and tear-off work.

A dropped panel or misfired nail gun can crack a window, tear-off debris can damage landscaping or a neighbor’s property, and a siding system that fails months after installation can turn into a costly lawsuit fast without coverage in place.

• Third-party bodily injury from a jobsite accident
• Property damage to a client’s home, vehicle, or adjacent structures
• Completed-operations claims after the job is finished
• Legal defense costs for covered claims

Typically NOT covered:

• Damage to your own tools, equipment, or vehicles
• Your own employees’ injuries (that’s workers’ comp)
• Faulty workmanship claims with no resulting property damage or injury in most states
• Intentional or contractual liability outside the policy terms

Who needs this: Every siding contractor, solo installers through full crews, since exterior installation work carries real third-party risk and general contractors routinely require proof of GL before allowing work to start.

Michigan-specific note: Michigan siding contractors need general liability that covers completed-operations exposure, since freeze-thaw water damage behind the siding can surface long after the crew leaves.

Learn more about this coverage →

Yes, nearly every state requires workers’ compensation insurance once a siding contractor has employees, and crews face real injury risk from ladder and scaffold work, power tools, and material handling.

Working from ladders and scaffolding at height, cutting panels with power saws, and hauling heavy siding material all cause a steady stream of fall, cut, and strain injuries, so workers’ comp is usually the only coverage that pays employee medical bills and lost wages.

• Medical bills for a work-related injury or illness
• Lost wages during recovery
• Disability benefits for permanent injuries
• Death benefits for dependents

Typically NOT covered:

• Injuries to non-employees (subcontractors typically need their own policy)
• Injuries from horsing around or intoxication in most states
• Occupational illness unrelated to the job
• Punitive damages

Who needs this: Any siding contractor with employees, and in many states owner-operators too. Check the state’s specific exemption rules.

Michigan-specific note: Michigan’s dual-trigger rule means coverage can be owed at just 1 employee working 35-plus hours a week for 13 weeks, well before a crew hits the general 3-employee threshold.

Learn more about this coverage →

Sometimes, general liability can respond to a completed-operations claim tied to trapped moisture behind an improperly installed weather barrier or flashing, but this is a well-documented defect category and coverage often depends on proper house-wrap and flashing installation.

Siding installed without a properly lapped weather-resistive barrier or correct flashing at windows, doors, and seams can trap water behind the wall, leading to hidden rot and mold that surfaces long after the crew has left, a real and well-documented liability category rather than a rare edge case.

• Completed-operations claims tied to a documented installation defect
• Legal defense costs for a covered claim
• Property damage claims from a related moisture failure, when the endorsement supports it

Typically NOT covered:

• Pure workmanship correction costs with no resulting property damage
• Damage from a manufacturer’s own defective product, which falls to the product maker’s policy
• Pre-existing moisture conditions the contractor didn’t cause or worsen

Who needs this: Any contractor installing siding over a weather-resistive barrier, where proper house-wrap lapping and flashing detail meaningfully reduce this risk.

Michigan-specific note: Michigan’s freeze-thaw winters make trapped moisture behind poorly flashed siding a real completed-operations risk, since repeated freezing accelerates rot and sheathing damage.

Workers’ compensation is the coverage that responds to a documented silica-related occupational illness claim, and OSHA’s respirable crystalline silica standard (29 CFR 1926.1153) directly applies to cutting fiber cement siding products.

Cutting fiber cement siding with a standard saw blade generates significant crystalline silica dust, and OSHA’s construction silica standard requires specific engineering controls, such as a HEPA-vacuum-equipped saw or wet cutting method, along with respiratory protection on this kind of work.

• Workers’ comp claims for a documented occupational illness tied to job exposure
• Legal defense costs tied to a covered claim

Typically NOT covered:

• OSHA citations and fines themselves are not insurable events
• Failure to follow required engineering controls or respiratory protection
• General liability does not typically respond to an employee’s own occupational illness, that’s workers’ comp

Who needs this: Any siding contractor whose crew cuts fiber cement siding products on site.

Michigan-specific note: Michigan runs its own OSHA-approved state plan, MIOSHA, which directly enforces the respirable crystalline silica standard (29 CFR 1926.1153) for contractors cutting fiber cement siding, in addition to federal requirements.

Yes, vehicles titled to your business, including trucks and trailers hauling siding panels, tear-off debris, and equipment, need commercial auto insurance since personal auto policies exclude business use.

Siding crews haul long panels, tear-off debris, and scaffolding between jobs all day, so a single at-fault accident can generate injury and cargo-related liability far above personal auto limits.

• Liability for injuries or property damage you cause while driving for work
• Physical damage to your own vehicles (with comp/collision)
• Hired and non-owned auto coverage for rented or borrowed vehicles
• Cargo/load-related liability in many policies

Typically NOT covered:

• Personal-use driving with no business nexus
• Mechanical breakdown or wear and tear
• Damage from operating outside permitted weight/route limits
• Cargo not covered under the specific policy’s cargo endorsement

Who needs this: Any siding contractor who owns, leases, or regularly uses vehicles or trailers titled to the business to haul material, debris, and equipment.

Michigan-specific note: Commercial auto coverage should extend to every business-titled vehicle a Michigan siding crew uses to move material and equipment between jobs.

Learn more about this coverage →

Not automatically, general liability and auto policies don’t cover your own tools and equipment, so a separate tools & equipment (inland marine) policy is needed for siding brakes, saws, nail guns, and scaffolding.

A siding brake, fiber cement saw, and pneumatic nail guns represent a real investment, and equipment staged at a jobsite overnight or hauled between jobs is exposed to theft and damage that standard property policies exclude.

• Theft of tools and equipment from a jobsite, trailer, or vehicle
• Accidental damage to owned equipment
• Equipment in transit between jobs
• Rented or leased equipment in many policies

Typically NOT covered:

• Normal wear and tear or mechanical breakdown
• Equipment not listed on the schedule
• Loss from unattended, unlocked trailers in some policies
• Gradual deterioration or rust

Who needs this: Any siding contractor who owns a siding brake, saws, nail guns, scaffolding, or other equipment worth protecting beyond replacing it out of pocket.

Michigan-specific note: Tools and equipment coverage protects the compressors, brake benders, and saws siding crews rely on and often store in a jobsite trailer.

Learn more about this coverage →

General liability can respond to a resulting third-party bodily injury or property damage claim, but disturbing asbestos-cement siding improperly on a pre-1980s home carries real regulatory exposure that goes beyond what a standard GL policy is built to absorb.

Many homes built before 1980 used asbestos-cement siding shingles, and improperly removing or breaking that material without following state and federal notification and handling procedures can trigger significant regulatory penalties on top of any injury or contamination claim.

• Third-party bodily injury or property damage from a covered incident, when a pollution endorsement supports it
• Legal defense costs for a covered claim

Typically NOT covered:

• Standard pollution and asbestos exclusions under a base GL policy with no endorsement
• The cost of remediation itself absent a specific pollution policy
• Regulatory fines and penalties for improper handling or notification failures

Who needs this: Any siding contractor doing tear-off work on structures built before 1980, where legacy asbestos-cement siding is a real, common discovery.

Michigan-specific note: Michigan’s older urban housing stock raises the odds that tearing off existing siding on a pre-1980s home disturbs asbestos-containing materials, which requires careful handling.

Most commercial and GC-subcontracted siding contracts require proof of general liability (often $1M/$2M limits) and workers’ compensation before you can start work, and many also require additional insured status naming the GC or property owner.

General contractors and commercial property owners use insurance requirements to transfer risk, and failing to meet a contract’s stated limits can get a siding sub pulled from a job or held liable directly.

• Minimum GL limits specified in the contract (commonly $1M per occurrence / $2M aggregate)
• Workers’ comp per state statutory limits
• Additional insured status naming the GC or property owner
• Waiver of subrogation when requested

Typically NOT covered:

• Coverage above your policy’s actual limits
• Requirements not stated in the written contract
• Retroactive coverage for work performed before the policy was active
• Waiver of subrogation unless specifically endorsed

Who needs this: Any siding contractor bidding commercial, multi-family, or GC-subcontracted work where the awarding party sets minimum insurance requirements.

Michigan-specific note: Michigan’s Occupational Code makes unlicensed residential contracts generally unenforceable in court, so siding contractors need active RB or MAC licensure before signing homeowner agreements.

Most siding contractors carry $1M/$2M general liability limits and statutory workers’ comp, adjusting upward for larger commercial or multi-unit projects where the completed-operations exposure is higher.

Coverage needs scale with project size and the requirements written into contracts, so a residential siding installer and a commercial fiber cement installer often carry very different limits.

• $1M per occurrence / $2M aggregate GL as a common baseline
• Higher limits for larger commercial or multi-unit projects
• State-mandated WC limits based on payroll and classification
• An umbrella policy for larger commercial siding projects

Typically NOT covered:

• One-size-fits-all coverage, limits should match actual contract requirements
• Coverage gaps from underinsuring against a specific contract clause
• Excess exposure without an umbrella policy

Who needs this: Any siding contractor should review their limits against the specific contracts they’re bidding rather than assuming a flat minimum.

Michigan-specific note: Michigan general contractors and property managers commonly require siding subcontractors to carry at least $1 million per occurrence in general liability.

Your insurance agent or broker issues a certificate of insurance (COI) that summarizes your active coverage, limits, and effective dates for a general contractor, property owner, or homeowner to keep on file.

A COI is the standard way contractors prove coverage without handing over the full policy, and most GCs and property managers won’t allow a siding crew on-site without one matching their required limits.

• Policy type, limits, and effective/expiration dates
• Additional insured endorsements when requested
• Certificate holder information for the requesting party
• Quick verification for bidding purposes

Typically NOT covered:

• A COI itself provides no coverage, it’s only proof of an existing policy
• Coverage changes made after the COI was issued unless reissued
• Guarantee of renewal or continued coverage

Who needs this: Any siding contractor working with general contractors, property managers, or municipalities that require documented proof of insurance before work starts.

Michigan-specific note: Trade Safe issues same-day certificates of insurance so Michigan siding contractors can meet a GC’s proof-of-coverage request without slowing down a job start.