Handyman Contractor Insurance in Maryland

Yes, general liability insurance is considered essential for any handyman business, covering third-party bodily injury, property damage, and completed-operations claims tied to the wide range of small repair and improvement jobs this trade covers.

A single handyman job can touch flooring, drywall, fixtures, and outdoor structures all in one visit, and any one of those tasks can lead to a dropped tool cracking tile, a ladder denting siding, or a loose fixture causing water damage that surfaces after the job is done.

• Third-party bodily injury from a jobsite accident
• Property damage to a client’s home or belongings
• Completed-operations claims after the job is finished
• Legal defense costs for covered claims

Typically NOT covered:

• Damage to your own tools, equipment, or vehicles
• Your own employees’ injuries (that’s workers’ comp)
• Faulty workmanship claims with no resulting property damage or injury in most states
• Work performed outside your actual scope of licensure, such as unlicensed electrical or plumbing work

Who needs this: Every handyman contractor, solo operators through small crews, since the broad scope of this trade carries real third-party risk across many different systems in a single job.

Maryland-specific note: General liability is critical in Maryland because the 500 dollar exemption threshold means nearly every real handyman job requires MHIC licensing and carries liability exposure.

Learn more about this coverage →

Yes, nearly every state requires workers’ compensation insurance once a handyman business has employees, and crews face real injury risk from ladder work, power tools, and the sheer variety of physical tasks this trade covers.

Handyman work moves between ladders, power tools, crawlspaces, and heavy lifting throughout a single day, and that variety is exactly what makes injury risk harder to predict and insure than a single-trade specialty.

• Medical bills for a work-related injury or illness
• Lost wages during recovery
• Disability benefits for permanent injuries
• Death benefits for dependents

Typically NOT covered:

• Injuries to non-employees (subcontractors typically need their own policy)
• Injuries from horsing around or intoxication in most states
• Occupational illness unrelated to the job
• Punitive damages

Who needs this: Any handyman contractor with employees, and in many states owner-operators too. Check the state’s specific exemption rules.

Maryland-specific note: Maryland workers’ comp runs through a competitive state fund model with Chesapeake Employers’ Insurance Company, pricing below the national median per Oregon’s 2024 DCBS index.

Learn more about this coverage →

No, a state’s dollar exemption threshold only affects whether you need a contractor’s license for a given job, it says nothing about insurance, and working under the threshold with no coverage still leaves you personally exposed to a lawsuit.

An exemption threshold exists so small, casual repair jobs don’t require the same licensing process as a full remodel, but the liability risk on that job doesn’t shrink just because the price tag is small, a client can still be injured or have property damaged on a $300 job as easily as a $30,000 one.

• General liability coverage regardless of whether the job falls under a licensing exemption
• Protection on jobs performed without a contractor’s license, where legally allowed

Typically NOT covered:

• The exemption itself provides no insurance or legal protection, it only affects licensing requirements
• Coverage for work that falls outside a state’s exemption scope, such as excluded trades

Who needs this: Any handyman contractor doing jobs at or below their state’s exemption threshold, since insurance is the only real protection on that work, not the exemption itself.

Maryland-specific note: Maryland’s exemption threshold is just 500 dollars in combined labor and materials, one of the lowest in the country, with no separate handyman carveout above that amount.

Most states carve electrical, plumbing, and HVAC work out of the handyman exemption entirely regardless of job price, so performing that work without the matching trade license can void your standing on the job and complicate a claim.

A simple work order can turn into a licensed-trade job fast, swapping a light fixture can turn into rewiring a circuit, and unclogging a drain can turn into repiping, and insurers and licensing boards both draw a hard line around those specific trades no matter how small the job looks.

• General liability for incidental work that stays within your actual scope and licensure
• Claims tied to work you were legally authorized to perform

Typically NOT covered:

• Claims arising from electrical, plumbing, or HVAC work performed without the required trade license
• Coverage gaps an insurer can point to if a claim reveals unlicensed specialty-trade work

Who needs this: Any handyman contractor who takes on jobs that could edge into electrical, plumbing, or HVAC work, where knowing the line and referring out matters as much as the policy itself.

Maryland-specific note: Electricians and plumbers are licensed through separate Maryland boards outside MHIC, so any electrical or plumbing work always falls outside the MHIC exemption regardless of price.

Yes, vehicles titled to your business, including trucks and vans hauling tools and materials between jobs, need commercial auto insurance since personal auto policies exclude business use.

Handyman businesses drive between multiple small jobs every day, often more stops than a single-trade contractor, so a single at-fault accident can generate injury and cargo-related liability far above personal auto limits.

• Liability for injuries or property damage you cause while driving for work
• Physical damage to your own vehicles (with comp/collision)
• Hired and non-owned auto coverage for rented or borrowed vehicles
• Cargo/load-related liability in many policies

Typically NOT covered:

• Personal-use driving with no business nexus
• Mechanical breakdown or wear and tear
• Damage from operating outside permitted weight/route limits
• Cargo not covered under the specific policy’s cargo endorsement

Who needs this: Any handyman contractor who owns, leases, or regularly uses vehicles titled to the business to travel between jobs and haul tools and materials.

Maryland-specific note: Commercial auto coverage supports Maryland handyman contractors working across the state’s Baltimore, DC suburb, and Eastern Shore markets.

Learn more about this coverage →

Not automatically, general liability and auto policies don’t cover your own tools and equipment, so a separate tools & equipment (inland marine) policy is needed for the broad tool kit this trade requires.

A handyman’s tool inventory tends to be wider than a single-trade contractor’s, covering carpentry, painting, minor plumbing, and general repair tools all at once, and that variety represents a real investment exposed to theft and damage on every job site.

• Theft of tools and equipment from a jobsite, vehicle, or storage location
• Accidental damage to owned equipment
• Equipment in transit between jobs
• Rented or leased equipment in many policies

Typically NOT covered:

• Normal wear and tear or mechanical breakdown
• Equipment not listed on the schedule
• Loss from unattended, unlocked vehicles in some policies
• Gradual deterioration or rust

Who needs this: Any handyman contractor who owns a meaningful tool inventory worth protecting beyond replacing it out of pocket.

Maryland-specific note: Tools and equipment coverage protects materials and toolkits used on the vast majority of Maryland jobs that exceed the 500 dollar exemption.

Learn more about this coverage →

General liability responds when faulty work causes covered property damage or injury, but a purely cosmetic mistake with no resulting damage is typically treated as a workmanship issue that GL does not pay to fix.

Because a single handyman visit can touch several different systems in one trip, a mistake in one area can trigger a domino effect, a poorly sealed fixture leads to water damage, a miscut board weakens a structure, and GL responds to the resulting damage even though it won’t pay to simply redo substandard work.

• Property damage claims resulting from a workmanship error
• Legal defense costs for a covered claim

Typically NOT covered:

• Pure workmanship correction costs with no resulting property damage or injury
• Redoing the work itself absent a resulting covered loss
• Work performed outside your licensed scope

Who needs this: Any handyman contractor whose work spans multiple systems in a single job, where an error in one area can create real downstream damage.

Maryland-specific note: Faulty small-job workmanship is generally addressed through general liability coverage rather than a standalone errors and omissions policy.

Most property management companies and HOAs require proof of general liability (often $1M per occurrence) before allowing a handyman on their properties, and many also require additional insured status.

Property managers and HOAs use insurance requirements to transfer risk across dozens or hundreds of units, and failing to meet a stated minimum can get a handyman pulled from an approved vendor list entirely.

• Minimum GL limits specified in the vendor agreement (commonly $1M per occurrence)
• Additional insured status naming the property manager or HOA
• Certificate of insurance on file before work begins

Typically NOT covered:

• Coverage above your policy’s actual limits
• Requirements not stated in the written vendor agreement
• Work performed for a property before the policy was active

Who needs this: Any handyman contractor working for property management companies, HOAs, or multi-unit landlords where a vendor agreement sets minimum insurance requirements.

Maryland-specific note: Written contracts help Maryland handyman contractors document job value against the 500 dollar MHIC threshold and avoid invoice-splitting scrutiny.

Most handyman contractors carry $1M/$2M general liability limits, adjusting upward for property-management or HOA work where higher limits are commonly required.

Coverage needs scale with the type of client and the properties involved, so a solo residential handyman and a crew servicing multi-unit properties often carry different limits.

• $1M per occurrence / $2M aggregate GL as a common baseline
• Higher limits for property-management or HOA vendor requirements
• State-mandated WC limits based on payroll

Typically NOT covered:

• One-size-fits-all coverage, limits should match actual client requirements
• Coverage gaps from underinsuring against a specific vendor agreement
• Excess exposure without an umbrella policy

Who needs this: Any handyman contractor should review their limits against the specific clients and properties they work with rather than assuming a flat minimum.

Maryland-specific note: Limits are often shaped by MHIC licensing expectations and the state’s active enforcement environment against unlicensed work.

Your insurance agent or broker issues a certificate of insurance (COI) that summarizes your active coverage, limits, and effective dates for a property manager, HOA, or homeowner to keep on file.

A COI is the standard way contractors prove coverage without handing over the full policy, and most property managers and HOAs won’t add a handyman to an approved vendor list without one matching their required limits.

• Policy type, limits, and effective/expiration dates
• Additional insured endorsements when requested
• Certificate holder information for the requesting party
• Quick verification for vendor approval

Typically NOT covered:

• A COI itself provides no coverage, it’s only proof of an existing policy
• Coverage changes made after the COI was issued unless reissued
• Guarantee of renewal or continued coverage

Who needs this: Any handyman contractor working with property managers, HOAs, or municipalities that require documented proof of insurance before work starts.

Maryland-specific note: Certificates of insurance are commonly requested by Maryland property managers and clients as part of verifying MHIC license standing.