Framing Contractor Insurance in Michigan

Yes, general liability insurance is considered essential for any framing contractor, covering third-party bodily injury, property damage, and completed-operations claims tied to structural framing work.

Framing sets the structural bones of a building before floors, railings, and walls are complete, so a single fall, dropped material, or property-damage claim can exceed what most contractors can pay out of pocket.

• Third-party bodily injury on or near the jobsite
• Property damage to a client’s home, business, or adjacent structures
• Completed-operations claims after the job is finished
• Legal defense costs for covered claims

Typically NOT covered:

• Damage to your own tools, equipment, or vehicles
• Your own employees’ injuries (that’s workers’ comp)
• Faulty workmanship claims with no resulting property damage or injury in most states
• Intentional or contractual liability outside the policy terms

Who needs this: Every framing contractor, solo or running full crews, since structural work carries real third-party risk, and GCs routinely require proof of GL before allowing work to start.

Michigan-specific note: Michigan general contractors and property managers typically require framing subs to carry general liability before starting work under a Residential Builder license.

Learn more about this coverage →

Yes, nearly every state requires workers’ compensation insurance once a framing contractor has employees, and framing is one of the highest fall-injury-risk trades in all of construction.

Framing crews work at height on open floors, roof trusses, and unfinished structures before railings or walls exist, so falls are common and severe, and workers’ comp is usually the only coverage that pays employee medical bills and lost wages.

• Medical bills for a work-related injury or illness
• Lost wages during recovery
• Disability benefits for permanent injuries
• Death benefits for dependents

Typically NOT covered:

• Injuries to non-employees (subcontractors typically need their own policy)
• Injuries from horsing around or intoxication in most states
• Occupational illness unrelated to the job
• Punitive damages

Who needs this: Any framing contractor with employees, and in many states owner-operators too. Check the state’s specific exemption rules.

Michigan-specific note: Michigan requires workers’ comp once a framing contractor regularly employs 3 or more workers, or immediately if even one employee works 35+ hours a week for 13+ consecutive weeks.

Learn more about this coverage →

Sometimes, general liability may cover resulting third-party property damage or injury from a structural failure, but a pure framing defect with no resulting damage is typically excluded, and structural errors are one of the highest-stakes completed-operations exposures in construction.

Framing establishes the load path for the entire structure, so a missed connection, undersized member, or bracing error can surface as a serious failure long after the crew has moved to the next job.

• Property damage from a structural failure traced to framing work
• Third-party injury from a related structural failure
• Legal defense costs for covered claims

Typically NOT covered:

• The cost to repair or replace your own defective framing work
• Damage from specs the GC or engineer provided incorrectly
• Gradual settling or damage attributable to workmanship rather than a covered occurrence

Who needs this: Any framing contractor performing load-bearing structural work, which is nearly all framing work.

Michigan-specific note: A framing defect contributing to a wall or roof failure can trigger a completed-operations claim under general liability, a real risk given Michigan’s freeze-thaw cycles stressing structural connections over time.

Yes, workers’ compensation covers a covered employee’s nail gun or power tool injury, and general liability can respond to a third-party injury from the same incident, since nail gun injuries are one of the most common and well-documented risks in framing.

Pneumatic nailers and other power tools cause tens of thousands of ER visits nationally every year, and framing crews use them constantly, making this one of the most predictable injury sources in the trade.

• Employee injury from a nail gun or power tool (workers’ comp)
• Third-party injury from a tool-related incident (GL)
• Legal defense costs for covered claims

Typically NOT covered:

• Injuries from horsing around or clear misuse in most states
• Damage to the tool itself (that’s tools & equipment coverage)
• Injuries to an uninsured subcontractor’s own crew

Who needs this: Any framing contractor whose crew uses nail guns, compressors, or other power tools daily, which is essentially every framing crew.

Michigan-specific note: Workers’ comp covers a Michigan framing employee’s nail gun or power tool injury on the job, an especially relevant exposure since MIOSHA’s residential fall-protection and safety training programs specifically flag framing and roofing tool use.

Yes, vehicles titled to your business, including trucks hauling lumber and framing materials, need commercial auto insurance since personal auto policies exclude business use.

Framing businesses haul heavy, bulky lumber packages between suppliers and jobsites constantly, so a single at-fault accident can generate injury and cargo-related liability far above personal auto limits.

• Liability for injuries or property damage you cause while driving for work
• Physical damage to your own vehicles (with comp/collision)
• Hired and non-owned auto coverage for rented or borrowed vehicles
• Cargo/load-related liability in many policies

Typically NOT covered:

• Personal-use driving with no business nexus
• Mechanical breakdown or wear and tear
• Damage from operating outside permitted weight/route limits
• Cargo not covered under the specific policy’s cargo endorsement

Who needs this: Any framing contractor who owns, leases, or regularly uses vehicles titled to the business to haul lumber and materials.

Michigan-specific note: Yes, Michigan framing contractors hauling lumber and tools between suppliers and job sites need commercial auto coverage.

Learn more about this coverage →

Not automatically, general liability and auto policies don’t cover your own tools and equipment, so a separate tools & equipment (inland marine) policy is needed for nail guns, compressors, and framing tools.

Nail guns, air compressors, and framing tools represent a real investment, and equipment left on a jobsite or hauled between jobs is exposed to theft and damage that standard property policies exclude.

• Theft of tools and equipment from a jobsite or vehicle
• Accidental damage to owned equipment
• Equipment in transit between jobs
• Rented or leased equipment in many policies

Typically NOT covered:

• Normal wear and tear or mechanical breakdown
• Equipment not listed on the schedule
• Loss from unattended, unlocked vehicles in some policies
• Gradual deterioration or rust

Who needs this: Any framing contractor who owns nail guns, compressors, saws, or other portable equipment worth protecting beyond replacing it out of pocket.

Michigan-specific note: Inland marine/tool coverage protects nail guns, compressors, and saws from theft or damage on Michigan framing sites, particularly during peak building season when equipment sits on-site overnight.

Learn more about this coverage →

Often yes, standard tools & equipment coverage is built for tools, not raw materials, so framing contractors staging lumber packages on an open jobsite should confirm their policy covers materials theft specifically.

Lumber packages staged on an open framing site are valuable, portable, and an easy target for theft overnight, a real and distinguishing exposure compared to trades that don’t leave large material stockpiles on-site.

• Theft of staged lumber or building materials from a jobsite, when specifically covered
• Weather damage to staged materials, when endorsed
• Materials in transit to the jobsite in many policies

Typically NOT covered:

• Materials theft under a policy with no materials or builder’s risk endorsement
• Normal weathering or degradation of stored lumber
• Materials already installed and not separately scheduled

Who needs this: Any framing contractor who stages lumber packages or other bulk materials on an open jobsite before use.

Michigan-specific note: Lumber and sheathing staged at a Michigan framing site are a real theft target, especially during winter slowdowns; builder’s risk or inland marine coverage for materials addresses that gap.

Most commercial framing contracts require proof of general liability (often $1M/$2M limits) and workers’ compensation before you can start work, and many also require additional insured status naming the GC.

General contractors use insurance requirements to transfer risk, and failing to meet a contract’s stated limits can get a framing sub pulled from a job or held liable directly.

• Minimum GL limits specified in the contract (commonly $1M per occurrence / $2M aggregate)
• Workers’ comp per state statutory limits
• Additional insured status naming the GC or property owner
• Waiver of subrogation when requested

Typically NOT covered:

• Coverage above your policy’s actual limits
• Requirements not stated in the written contract
• Retroactive coverage for work performed before the policy was active
• Waiver of subrogation unless specifically endorsed

Who needs this: Any framing contractor bidding commercial or multi-family contracts where a GC sets minimum insurance requirements.

Michigan-specific note: Bidding commercial or larger residential framing work in Michigan typically requires proof of general liability and workers’ comp meeting the GC’s specified limits.

Most framing contractors carry $1M/$2M general liability limits and statutory workers’ comp, adjusting upward for larger commercial or multi-story projects where the fall-injury and structural exposure is higher.

Coverage needs scale with project size and the requirements written into contracts, so a small residential framing crew and a commercial multi-family crew often carry very different limits.

• $1M per occurrence / $2M aggregate GL as a common baseline
• Higher limits for larger commercial or multi-story framing work
• State-mandated WC limits based on payroll and classification
• An umbrella policy given real fall-injury and structural severity

Typically NOT covered:

• One-size-fits-all coverage, limits should match actual contract requirements
• Coverage gaps from underinsuring against a specific contract clause
• Excess exposure without an umbrella policy

Who needs this: Any framing contractor should review their limits against the specific contracts they’re bidding rather than assuming a flat minimum.

Michigan-specific note: Most Michigan framing contractors carry at least $1 million per occurrence / $2 million aggregate general liability, with workers’ comp at statutory limits and higher limits for larger residential developments.

Your insurance agent or broker issues a certificate of insurance (COI) that summarizes your active coverage, limits, and effective dates for a general contractor, property owner, or property manager to keep on file.

A COI is the standard way contractors prove coverage without handing over the full policy, and most GCs won’t allow a framing sub on-site without one matching their required limits.

• Policy type, limits, and effective/expiration dates
• Additional insured endorsements when requested
• Certificate holder information for the requesting party
• Quick verification for bidding purposes

Typically NOT covered:

• A COI itself provides no coverage, it’s only proof of an existing policy
• Coverage changes made after the COI was issued unless reissued
• Guarantee of renewal or continued coverage

Who needs this: Any framing contractor working with GCs, property managers, or municipalities that require documented proof of insurance before work starts.

Michigan-specific note: Trade Safe can issue a same-day certificate of insurance for Michigan framing contractors, listing the GC or developer as certificate holder.